燃煤电厂海水烟气脱硫工艺原理初探

海水烟气脱硫工艺是利用天然的纯海水（燃煤电厂可直接利用电厂的冷却循环水）作为烟气中ＳＯ２的吸收剂，无需其它任何添加剂，也不产生任何废弃物，具有技术成熟、工艺简单、系统运行可靠、脱硫效率高（理论脱硫效率可达９８％）和投资运行费用低等特点，目前在一些国家和地区已得到日益广泛的应用。本文是在部分模拟试验的基础上，对海水烟气脱硫工艺进行了简单的阐述。     

广州轨道交通三号线高速行驶条件下对安全限界的影响研究

给出了轨道交通车辆横向偏移量的计算方法 ,并应用列车 -线路动力耦合模型 ,分析了广州地铁三号线的安全限界变化问题。确定了当前按 80km/h行车速度设计的建筑限界能满足 13 0km/h行车速度的要求 ,限界尺寸不需改动可保证列车运行安全平稳     

建设项目审批数据管理系统的设计与实现

本系统根据葫芦岛市环境保护的需要,整合各种环境保护建设项目审批数据,建立Oracle数据仓库,利用PowerBuilder技术完成对环境保护建设项目数据的管理、统计与发布。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach

This paper describes a method for determining reductions of SO₂ emissions from coal- and oil-fired power stations, oil refineries and large industrial units in the UK taking into account their pollution potential. The method is based on the use of two gridded data sets: critical loads, which represent the sensitivity of the environment to acid deposition and modelled estimates of total (wet + dry) sulphur deposition for 646 point sources within the UK. An iterative method is used to identify and subsequently reduce emissions from point sources that contribute most to areas of critical loads exceedance. This paper demonstrates how the method may be used to determine an optimal allocation of emissions across the UK which yields the maximum amount of environmental protection per unit of emission.The paper then goes on to consider the changes that will have to take place within the UK power generation industry in order to meet the revised EC Large Combustion Plant Directive which comes into force on 1 January 2008. Particular emphasis is placed upon proposed emissions trading schemes and the environmental implications of allowing trading between stations with high and low pollution potentials. The paper concludes by suggesting that the emissions trading process should take into account the pollution potential of each source, irrespective of whether the proposed emission is within the plant's agreed emission limit. An approach based entirely on minimizing environmental damage rather than one which takes cost into account, as in current integrated assessment modelling, could provide an interesting approach across the rest of Europe.     

环境税收制度的效益分析及其对比优势探讨

环境税收制度是未来中国环境政策改革的突破口，相对于其它的环境政策如排污收费与排污权交易等，环境税收其经济效益与环境效益明显，开征环境税收有重要的意义，但在短期内，我国实施环境税收制度的条件尚不成熟，环境政策体系应该采取税费并存，并逐步过渡到以环境税为主的方式。     

内蒙古东部地区电力工业用水对策及可持续发展研究

合理进行水资源配置，是当前确保各个行业用水的关键；在工业生产和建设中保护好环境和自然生态，从而保证工业的可持续发展，是整个社会发展非常重要的一环：本文宏观地提出了针对内蒙古东部地区电力工业用水的对策及可持续发展研究的建议。     

上海市机动车排污状况与污染控制战略

通过对上海市中心城区机动车行驶工史现状的主要特点及发展趋势的分析，计算出中心城区１９９５年机动车尾气排放的ＣＯ、ＮＭＨＣ和ＮＯｘ负荷，分别占区域内机动车和固定源产排放总量的７６％、９３％和４４％，据预测，到２０１０年，中心城区内机动车排出的ＣＯ、ＮＭＨＣ和ＮＯｘ负荷，将分别占区域中机动车和固定源排放总量的９４％、９８％和７５％，因此，针对机动车排污所面临的严峻挑战，需要采取加强机动车检查与维修（Ｉ     

广东核电站厂址降水特征分析

介绍广东核电站厂址降水特性分析的方法学，给出降水的气侯学统计以及降水率、降水持续时间的分布特征．